PlasmaMade GUC 1314, Инструкция по установке и эксплуатации, Страница: 14 / 72

14
this also applies to the return of the old filter. Please register your product for
warranty at www.warranty.plasmamade.com .
9. Malfunction
Incompetent repairs are dangerous, you run the risk of an electric shock! If the
device is faulty, remove the plug from the socket and contact customer service at
service@plasmamade.com .
When there is no solution after trying the tricks above, please try our helpdesk at
www.plasmamadeservice.com
10. Environment-friendly waste processing
The PlasmaMade Airfilter complies with the requirements of the
European Directive concerning Waste Electrical and Electronic
Equipment (WEEE). This Directive contains stipulations in force in the
EU concerning the return and processing of scrap equipment.
Also ensure environmentally friendly processing of the waste packaging material.
This installation and user manual has been prepared carefully. However, no rights may be derived from any
printing or spelling errors.
Malfunction Possible cause Solution
Device does not
work.
The plug is not inserted
in the socket.
Put the plug into the wall socket.
Power cut.
Check whether other kitchen
equipment is working.
Blown fuse.
Check at your central electricity point
whether the device’s fuse is intact.
Red lamp flashing. Overloading of filter.
Remove power from the filter
temporarily, thereafter the electronics
will reset itself.
Blue light flashing
during the operating
mode.
The cleaning time of
the filter is reached.
Turn the hood off. You can re-enable
the hood after 1-2 minutes.
Blue light flashing.
The maximum lifetime
of the filter is reached. Purchase a new filter.