17
1. General
Thank you for the purchase of a
PlasmaMade Airfilter.
The
PlasmaMade Airfilter
is intended to remove airborne dust particles, pollen, micro-
organisms (house dust mites, bacteria, viruses and moulds), cigarette smoke and smells
from the air. If the source of the smell is still present, the
PlasmaMade Airfilter
cannot
remove the smell completely (for example if you are still cooking). Harmful gases (carbon
monoxide etc.) cannot be removed by the
PlasmaMade Airfilter
. The
PlasmaMade Air
Filter
features OACS (Ozone Active Control System) and IACS (Ionization Active Control
System) to meet the latest, strictest safety standards.
For more information, please see:
www.plasmamade.com.
Traditional air filtering
PlasmaMade Airfilter
Extracts dirty air outside. This increases
energy consumption and costs.
Works on a recirculation basis. In this way,
no energy or heat is lost.
Air is only extracted, not cleaned.
Smells, pollen, allergens, grease and
other coarse pollutants are filtered out
of the air by means of plasmamade
recirculation.
Filters must be replaced and/or cleaned.
Self-cleaning filter. No mechanical pre-
filter needed, the filter cleans itself
Often devices that make a lot of noise.
Makes no noise and in fact has a noise-
reducing effect on the equipment on
which the filter is applied.
Consumes relatively much electricity.
Very low power consumption (12 watts)
due to DC technology and a 12 volt
connection.
The
PlasmaMade Airfilter
produces a very small amount of ozone. This amount lies
well below the permitted value. It may well cause a slight a ionisation smell.
