Plas-Ties TIE-MATIC 603, Руководство по эксплуатации, Страница: 7 / 22

Page 8
M
OUNTING AND
S
TART
-U
P
The Tie-Matic should be secured to your work table by:
1. Installing the front stabilizer on the unit. (Figure III-1)
2. Rubber suction cup feet (optional part #16827)
are available for com
plete stability on a stainless steel table or flat surface area.
3. Also for a permanent position, you can bolt the Tie-Matic to a work table
with 10-32 screws to the bottom of the unit.
4. The Tie-Matic must be set in the “HOME” position to start the twist-tying
process. To set the “HOME” position, align the orange mark on the
switch cam with the orange mark on the safety cover. (Figure III-3)
5. To start the machine, plug the machine into a power source a n d
f l i p
the “ON/OFF” switch on the side of the machine.
SECTION III: Operation
Front Stabilizer
Suction Cup Feet
(Figure III-1) (Figure III-2)
(Figure III-3)
“HOME” position