Plas-Ties TIE-MATIC 603, Руководство по эксплуатации, Страница: 10 / 22

F
UNCTI ONAL
I
NFORMATIO N FOR T HE
T
I E
-M
ATIC
M
AC HIN E
HOW IT WORKS:
When a product is inserted into the throat of the machine, it depresses a trigger
which trips a limit switch, starting the drive gear motor. The gear motor causes
the gear segment to operate through one revolution. This one revolution feeds
tie material, wraps it around the product, cuts material to required length and
twists ends together.
The product has now been tied and is removed by pulling toward the operator.
The Tie-Matic will repeat tying cycle ONLY after tied product is removed and an-
other product inserted into the throat.
CLEARING A JAM:
As a safety precaution, the power switch should ALWAYS be turned to the OFF
position when inspecting the mechanism for any reason, such as: unloading or
reloading twist tie material, cleaning the machine, removing material or perform-
ing adjustments.
When material jams the twist-tying cycle, you will need to depress the Release
Actuator (Appendix A, Item #185) to unlock the motor brake and remove the
jammed material (See Figure III-10).
The Tie-Matic must be set in the “HOME” position to start the twist-tying
process. To set the “HOME” position, align the orange mark on the switch cam
with the orange mark on the safety cover. (Figure III-3)
Page 11
SECTION III: Operation
(Figure III-10)
Release Actuator