9
However, in the following situations, an incoming caller name is not announced:
• if you use the sensors to automatically answer a call while putting on your headset
• if the caller is unknown, unlisted, or blocked.
During a call, you can mute the microphone.
Tap the Mute button . You will hear “mute on” confirmation. An alert repeats every
15 minutes to remind you of microphone mute. Tap the Mute button again to open the
microphone and hear “mute off” confirmation.
Toggle the Volume button up (+) or down (–) during a call or while streaming audio.
Smart Sensors
™
technology in this headset recognizes if the headset is being worn and can
automatically perform time-saving functions.
Putting on your headset will:
• Answer an incoming call
• Transfer an active call from your phone
• Resume streaming audio
Taking off your headset will:
• Reject an incoming call
• Transfer an active call to your phone handset
• Pause streaming audio
• Lock the Call button to avoid accidental calls
Reset Sensors
You may need to reset the sensors if they are not working as expected.
1
Test Wearing the headset, tap the Call button to test sensors. A talk time voice alert
means sensors are working. A tone means sensors need to be reset .
2
Reset To reset the sensors, charge your headset and place on a flat non-metallic surface for
more than 10 seconds.
A 2-second press of the Play/Pause button will either pause or resume playback of
streaming audio.
NOTE
You must pause your streaming audio before you:
•
use your headset’s voice commands
•
initiate an outbound call via the headset (call back or voice dial)
NOTE
If you power-off the headset or go out of phone range while streaming audio,
your headset will not play/pause the stream upon reconnection with your phone until you
manually resume streaming with your phone.
Mute
Adjust the volume
Use sensors
Play or pause
streaming audio
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
