5
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Pairing
The first time you switch on your headset it begins the pairing process.
1
Place the headset on your ear and turn it on.
2
While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone
and set it to search for new devices.
• iPhone: Settings > General > Bluetooth > On
• Android
™
Smartphones: Settings > Wireless & Networks > Bluetooth: On > Scan for devices
NOTE
Menus may vary by device.
3
Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or
accept the connection.
4
Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
NOTE
To enable caller name announcement, allow access to your contacts if your phone
prompts you.
After pairing your headset to your phone you may want to pair another or new phone.
1
Switch on your headset then choose:
• Tap the Voice button and say “Pair mode,” or
• Press and hold the Call button until you hear “Pairing”
2
While the headset LEDs are flashing red and blue, activate Bluetooth® on your phone
and set it to search for new devices.
3
Select “PLT_Legend.” If your phone asks, enter four zeros (0000) for the passcode or
accept the connection.
4
Once successfully paired, LEDs stop flashing red and blue and you hear “pairing successful.”
NOTE
To enable caller name announcement, allow access to your contacts if your phone
prompts you.
Pair first time
Pair another phone
