Plantronics Savi User Guide
10
5 Lifter set-up (optional)
5.1 Installing lifter
5.2 If you do not hear a dial tone
1
If you do not hear a dial tone, raise the lifter height
switch to the next highest position.
1
Firmly press the handset lifter power cord into the
handset lifter jack.
2
While wearing your headset, slide the handset lifter arm
under the handset until the lifter base touches the side
of the phone.
3
Slide the lifter up to where it nearly touches the handset
earpiece.
7
Gently place the lifter on the desk phone in the pre-
determined position.
8
Press firmly to adhere.
Handset lifter
power cord
2
Repeat Steps 2 to 5 in Section 5.1 as necessary until you
hear a dial tone.
3
When you hear a dial tone, secure the lifter as described
in Steps 6 to 8.
4
Press the call control button on your headset to activate
the lifter.
5
If you hear a dial tone, the lifter is set correctly and
needs no adjustment.
6
Remove the protective strips from the 3 mounting tapes
on the underside of the lifter.
