8
USB Bluetooth Adapter Indicator Lights
Action
Indicator Lights
Disconnected from the headset
No LED
Connected to the headset
Solid blue
Microphone turned on
Flashes blue slowly
Pairing mode
Flashes blue rapidly
Pairing Your Headset with the
USB Bluetooth Adapter
NOTE
The Bluetooth USB adapter comes pre-paired to the headset;
however, if you fi nd that you need to pair your headset to the adapter again,
you can do so by performing the following steps.
1. Start with the headset powered off.
2. Press and hold the power button for about 5-6 seconds until the light on
the headset starts fl ashing an alternating red-blue. Release the power
button.
3. Insert the Bluetooth USB adapter into the computer. Once the devices
pair successfully, the LED on the headset stops fl ashing.
