If you leave your headset powered on but out of range of your paired phone for more than 20
minutes, your headset will conserve its battery power by entering into a DeepSleep
™
mode.
Once back in range with your phone, press any button to exit DeepSleep mode. If your phone is
also ringing, tap the Call button again to answer your call.
Bluetooth has a working “range” of up to 33 feet between the phone and earbuds before audio
degrades and the connection is lost.
Your earbuds try to reconnect after a lost Bluetooth connection. If they can’t, then tap the
Audio/call button once or manually reconnect via the phone’s Bluetooth device menu.
Your headset speaks English.
Voice alerts list
• "Battery low/medium/high"
• "Connection switched"
• "Headset connected"
• "Not connected"
• "Mute on/off"
• "Pairing"
• "Pairing successful"
• "Power on/off"
• "Recharge headset"
• "Redial"
When you restore the earbuds to its factory settings, the paired devices list is deleted.
1
First, put the earbuds in pairing mode. Choose from the following:
• With the earbuds powered off, press and hold the Audio/call button until you hear "pairing" or
• With the earbuds powered on and not during a call, press and hold the volume up (+) and
volume down (–) buttons until you hear "pairing"
The indicator light, on the right earbud, flashes red and blue to indicate pairing mode.
2
Second, while the earbuds are in pairing mode, press and hold the volume up (+) and volume
down (–) buttons until the LED flashes purple.
After the reset, the earbuds power off.
More Features
Deepsleep Mode
Stay connected
Voice alerts
Restore factory settings
14
