background image

 
 
When installing the provided ceiling hooks it is very important that the pilot 
hole drilled for the ceiling bolts is no larger than 5/32”.  Also, the wood must 
be solid and sturdy enough to handle the load being placed on it. 

CAUTION:

 Not screwing the ceiling bolt all the way into the material can 

cause hardware failure and possible injury.  Fig. 18   Ensure the ceiling hook 
is correctly threaded all the way in the material. Fig. 19 
 
 
 
 
 
 
 

 

 

WRONG   EXPOSED THREADS     

 CORRECT    NO EXPOSED THREADS 

 
FIG.18 

 

 

 

 

 

FIG.19 

 

 

CARE TIPS 

LISTED BELOW ARE SOME TIPS TO HELP KEEP YOUR 
FURNITURE LOOKING NEW. 

To preserve the finish on stained or painted furniture it is highly recommended 
that they either be placed indoors or in a protected environment such as a 
covered porch.  In any case the finish will last longer and look better if kept out 
of direct sunlight and blowing rain. The finish on this furniture will last for a 
lifetime if used indoors.  This furniture is not intended to be used in an 
unprotected environment. The sun and rain will weather the varnish finish if left 
out in the elements over time (6 months to one year depending on the climate).  
Our furniture  products need the same attention as any other solid wood 
furniture and monthly cleaning with any quality household furniture polish will 
keep your furniture looking new for many years to come.   If your climate has 
high humidity, even if you follow the recommended cleaning intervals above, you 
may have problems with mold or mildew.  To remove the mold and mildew 
dilute one ounce of bleach into sixteen ounces of water and apply with a soft 
cloth.  More than one application may be necessary.  Allow to dry and apply 
furniture polish to protect the finish.   

 
 
 

12 

 

 

Содержание SLAT PORCH SWING 850














Отзывы: