Planon DocuPen X SERIES, Инструкция по эксплуатации

Страница: 14 / 22

14
Mode: B&W TIF
By selecting this mode, you will be able to scan your
image in black and white. Also the image will be
saved in you DocuPen Xseries scanner in the *.TIF
format. It is recommended that you choose this mode
when you are scanning an image that contains only
black and white colors. By doing so, you can optimize
the memory space on your DocuPen Xseries scanner.
Mode: GRAY JPG
By selecting this mode, you will be able to scan your
image in grayscale mode. Basically it is similar to
B&W mode, except the black is not 100% black.
There will be different levels of gray representing all
the non-white colors in your image. The image will be
saved in you DocuPen Xseries scanner in the *.JPEG
format.
Mode: COLOR
By selecting this mode you will be able to scan the
image in color. This will take up the most space on
your memory card in your DocuPen Xseries scanner.
Resolution [DPI] : Represents the resolution [DPI -
dots per inch] which you would like to scan your
image with. There can be 3 resolution [DPI] settings
chosen.
150 DPI: 150 dots per inch, this is the lowest quality
of sharpness at which the image can be scanned.
300 DPI: 300 dots per inch, this is a very good quality
of sharpness at which the image can be scanned.
600 DPI: 600 dots per inch, this is highest quality of
sharpness at which the image can be scanned
Select Scan : Represents the images that have been
scanned and saved in PRINTSTIK Mode ONLY on your
DocuPen Xseries scanner. This setting allows you to
select the scans saved in the memory bank and print
them. There are two options you can choose in this
setting.
SCAN: PRINT LAST: Allows you to print the latest
image you have just scanned.