Port
Purpose
Service
2006 TCP
Unit data
514
1)
UDP
Event protocol data
Syslog
1)
The port can vary depending on the configuration.
NOTE
When the unit is first connected to a computer, it applies the language and
time settings of the computer.
3.3.3 Configuring unit in Planmeca Device Tool
Configuration is performed using Planmeca Device Tool.
NOTE
The configuration with the Planmeca Device Tool should be performed by
qualified service technician only.
For more detailed instructions, see
Planmeca ProScanner 2.0 technical
manual (publication number 30019806).
1. Start Planmeca Device Tool.
2. From the Device Tool launcher, select ProScanner 2.0.
3. Select the Planmeca ProScanner 2.0 unit from the left most device panel
(if not yet selected).
The connected ProScanner 2.0 should become visible in the Proscanner
2.0 devices list.
4. The unit name (designation) can be changed and information queried
under the General tab.
5. An IP address can be entered manually and DHCP can be activated /
deactivated under the Connection tab.
Entering a fixed IP address (recommended)
NOTE
To reset the network settings, keep the unit reset key pressed for 15 - 20
seconds while switching on.
The default settings are as follows:
•
IP address: 192.168.1.100
•
Subnet mask: 255.255.255.0
•
DHCP activated.
1. Deactivate DHCP when you have selected a device from the list.
2. Enter the IP address, subnet mask and gateway.
3. Save the configuration by selecting Apply.
Testing device
You can scan in an X-ray image to check that the unit is properly connected.
1. Open Planmeca Romexis.
2. Create a test patient in Romexis (for example, patient ID: DEMO0001).
3 Assembly
User's manual
Planmeca ProScanner 2.0 29
Содержание ProScanner 2.0
