33
resulting signal to the
VCF
and the
VCA2
CV
inputs. You will be able to play
expressive sounds while maintaining the curve of the envelope.
2. Some waves of the oscillators are inverted. If you mix directly in the
VCF
mixer you will subtract one from another. Inverting one of them here will
have the contrary effect. So you can add the main tone to an square wave
by mixing the inverted sine wave with the square here.
SAMPLE AND HOLD
This is probably one of the most enigmatic functions to the synth newbie.
But the Sample and Hold,
S/H
, is not that complex to understand. As it
names says the
S/H
samples a signal and holds it.
The
CLOCK
input determines the rate at
which the
S/H
will sample the signal.
The
SIGNAL
input is the signal that will be
sampled. At each clock pulse the
S/H
retains the value (an analog voltage) and
sends it to the output until the next
pulse comes in. The
S/H
can work at
audio or CV rates.
The
GLIDE
will add a slope between each
step at the output.
Set this patch:
Содержание ANTS!
Страница 1: ...ANTS PLANKTON ELECTRONICS ...
Страница 2: ......