17
NOTES ON THE MIDI TO CV
1. The GATE out works with logic values. 0 (off) or 5V (on).
2. The CV outs have a resolution of 7bit each and they work from 0 to 5V.
3. The CV outs work with the standard of
V/oct
. They will output 1V for each
octave played (on CV2 out this is only when it is set the 2nd note mode).
Nowadays, the V/oct is the standard used by the vast majority of oscillators.
4. The MIDI note conversion goes from note 36 (0V) up to 96 (5V), giving a
total of 5 octaves. Below note 36 the converter will output the last note
played and no GATE signal at all, but the MIDITOCV led will blink to show
that the right channel is selected.
5. The oscillators will respond fine on the low range. Playing the highest two
MIDI octaves will result in a bad tracking (MIDI note to pitch). Use them to
elevate the pitch out of its natural range, not for playing melodies.
6. The provided MIDI cable converts the MIDI DIN 5 to a 3.5mm MIDI
connector. If the cable is too short you just need to connect it to a MIDI
female-female adapter or a female-male extender cable. They are available
at most of the music stores.
OSCILLATORS
Oscillators are the main functions of a synth. They are in charge to generate
the sound waves.
ANTS!
Provides 4 analog triangle core oscillators (the term
‘triangle core’ refers to the electronic design of the oscillators). There are 4
analog oscillators:
XTOSC·X, XTOSC·Y, OSC·X
and
OSC·Y.
The 4 oscillators have V/oct inputs, so all 4 can be played musically if you
connect the
MIDI TO CV
outputs to them.
Содержание ANTS!
Страница 1: ...ANTS PLANKTON ELECTRONICS ...
Страница 2: ......
