Copyright Planika Sp. z o.o.
www.planikafires.com
IG0263#04
21.02.2020
6
3.
INSTALLATION
3.1.
Box contents
•
1x complete Gustav Gas fireplace
•
4x bag of decorative stones
•
1x 2 metre rubber gas linkage
–
installed
•
1x pressure regulator (37mbar)
–
installed
•
1x AA Battery
•
1x Euro Set
•
1x installation manual and
user’s manual
3.2.
Unboxing and installation
•
The contents of the boxes need to be carefully unwrapped from the foam foil.
•
Remove the bags with decorative stones from the burner reservoir and place them away from it.
•
Check the completeness of the elements with the contents list.
•
Make sure that the device
nor its elements weren’t damaged during the transportation (if they were, notify
the supplier).
•
Place Gustav Gas on a flat, paved surface outside of the building, preferably on the place of final installation.
Leave sufficient space on the side of the appliance where control panel is located (minimum 1 m).
•
The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the
fireplace.
•
WARNING!!!
The stones may not cover or be placed inside the device protecting the ignition unit
Photo 1
