Copyright Planika Sp. z o.o.
www.planikafires.com
IG0263#04
21.02.2020
17
•
Remove the battery and place the new one into the container.
WARNING!
Remember about proper
polarization of the battery.
•
Screw the cover of the battery container.
5.
TESTING
WARNING!!!
NEVER TURN ON THE DEVICE IF THE CHARACTERISTIC SMELL OF GAS IS PERCEPTIBLE.
If you smell gas during the operation of the fireplace turn off the device immediately and cut off the gas supply from
the gas cylinder by shutting its valve.
5.1
Checking for gas leaks.
•
Check if all connections are airtight.
•
To do that apply all connections with soapy water (or water with another foamy substance) or with a
professional spray for leak detection.
•
If air-bubbles are present that means the connection has a leak.
•
Remove the leaks in the identified spaces.
•
Check for leaks once again.
•
After the inspection dry the inspected connections.
•
The device may only be used again after all leaks are removed.
•
If the problem happens again please contact the dealer.
5.2
Checking the flame appearance.
•
Burn the Gustav Gas on max flame height and check the appearance of the flame.
•
The flame should evenly placed on the whole surface of the main burner.
•
If visible gaps are present or there are substantial differences in flame height turn off the fireplace and after
the device is cooled adjust the placement of decorative stones in such a way for them to be evenly placed on
the whole surface of the main burner.
•
WARNING!!!
Remember not to cover the protective basket which houses the ignitor and thermocouple, with
stones.
•
Turn on the fireplace and check the appearance of the flame once again.
