Copyright Planika Sp. z o.o.
www.planikafires.com
IG0251#05
06.03.2019
6
•
Fireplace series VERSAL should be monitored at least once a year in accordance with this installation manual
and as well as all applicable national and local regulations concerning safe installation and use of gas
appliances.
•
Make sure that the information on the nameplate are consistent with the local type of domestic gas and
pressure.
•
Do not change the structure of the device and its sealed components or modify the default settings of the
fireplace.
•
Do not place extra decorative accessories (other than those supplied with the unit) or the glowing coals on the
burner or in the combustion chamber.
•
The components of the control system with the gas valve cannot be exposed to moisture.
•
Carbon dioxide (CO2) or powder extinguisher must be placed near the unit.
•
Before connecting the device you should familiarize yourself with all connecting schemes (including electric),
set out in the manual.
•
The first time you turn on the fireplace VERSAL, it is necessary to use it at the maximum level of the flame for
a few hours so that the elements warm themselves, and possible small residues of paints, coatings and
lubricants will evaporate.
•
During the first hours of use of the device, additional ventilation and ventilation of the room is recommended,
to quickly remove the characteristic smell fire resistant paint.
•
WARNING!
When you first start your device, the installer should perform the leak test on all gas connections,
check the connections of all elements of the system (including the proper connection to the concentric air
combustion system) and check the correct operation of all the items, in particular system of ignition and flame
failure protection system.
•
Do not move the device during its operation.
•
The surface of the fireplace series VERSAL may strongly heat up during use - up to more
than 100 °C .
WARNING!
Accessible parts of the devices, including the glass, can become very hot. You
absolutely must protect children from contact with the working device!
•
In case of failure of the glass panes, please contact your service provider or distributor.
•
The device should be installed away from flammable materials.
•
All metal parts of the fireplace series VERSAL are constructed of materials resistant to rust or covered with
corrosion coating.
•
Never leave the fireplace VERSAL unattended (as in the case of any other type of fireplace or fire in the room).
Fireplace series VERSAL should be installed out of reach of children, unauthorized persons and animals so
direct contact with hot parts of the fireplace is not possible.
•
In case of feeling any gas leaks, immediately turn off the fireplace and, depending on the type of fuel, close
the main valve on the gas cylinders LPG or close the valve supplying natural gas to the device. You should also
ventilate the room in which the fireplace is installed and contact the service staff.
•
If the unit is not used for a long time, depending on the type of fuel, close the main valve on the LPG cylinder
or close the valve supplying natural gas to the device.