3.2 Left/Right Corner Installation
11
a) Provide electricity connection with 230 V, 50 Hz, min. 3x1,5mm
2
and optional SHS cables with min. 4x0,25 mm2/ AWG 23 inside the cavity.
b) Slide the appliance inside the framing cavity. The appliance is shipped with stability bracket(s) installed on the open side(s) to keep the
appliance square while in transport and during installation. Keep the bracket(s) on while framing up the setting to assist in minimizing
movement of the appliance.
The space inside the housing cannot be connected to any ventilation !
a) Make sure that the appliance is level before securing it in place.
b) Secure the appliance to the framework with screws using the existing mounting holes on the appliance flanges.
c) Remove the stability brackets
Optional SHS,
min. 4x0,25 mm
2
AWG 23
1.
doprowadЯ pod≥aczenie
elekt opcjonalny
przewуd do SHS
2.
wsuс casing w przygotowany
otwуr
230 V, 50 Hz, min. 3x1,5 mm
2
PE
b
a
c
b
a
c