Planex MZK-W04NU, Руководство пользователя

Страница: 61 / 82

3
52
MZK-W04NU
who sent a message) or in an encryption or a decryption of a message.
It is applicable only when you select WPA-PSK authentication.
You will need to enter an 8~63 characters password to start the
encryption process, which will generate four WEP keys automatically.
œ
Default Key
Ĉ
You can enter four WEP keys and select one of them as
default key. Then the router can receive any packets encrypted by one
of the four keys. Only the key you select it in the " Default key "will
take effect.
œ
WEP Key 1~4
Ĉ
The WEP keys are used to encrypt data transmitted
in the wireless network. Fill the text box by following the rules
below. 64-bit WEP: input 10-digit Hex values (in the "A-F", "a-f"
and "0-9" range) or 5-digit ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and
"0-9" range) or 13-digit ASCII characters as the encryption keys.
œ
RADIUS Server IP
Ĉ
Please input the IP address of your RADIUS
authentication server here.
œ
RADIUS Port
Ĉ
Please input the port number of your RADIUS
authentication server here. Default setting is 1812 .
œ
RADIUS Pass Phrase
Ĉ
Please input the password of your RADIUS
authentication server here.
œ
Apply
Ĉ
Click this button to save the settings and restart the router.
œ
Clear
Ĉ
If there is anything wrong with the settings you made, you can
click
ņ
Clear
Ň
to configure the page again.