Planex MZK-W04NU, Руководство пользователя

Страница: 38 / 82

2
29
Chapter2 Basic Setup & Configuration
7.4.PPPoE Unnumbered
Unnumbered PPPoE can let you manage a range of IP addresses but only
need to dial once. When an IP address is received at the gateway, the driver
will use network mask to configure the subnet mask of ASIC. At the server
side, you must delete the corresponding hot route and add a new network
route so that the packets can be correctly routed to gateway.
œ
USER ID
Ĉ
Enter the User Name provided by your ISP. (The ID must
be alphanumeric characters and case sensitive.)
œ
Password
Ĉ
Enter the Password provided by your ISP. (The password
must be alphanumeric characters and case sensitive.)
œ
Confirm Password
Ĉ
Enter the Password again for verification.
œ
IP Address
Ĉ
Please enter the IP address provided by your ISP.
œ
Subnet Mask
Ĉ
Please enter the subnet mask address provided by the ISP.
œ
MTU
Ĉ
MTU means Maximum Transmission Unit, the largest physical
packet size, measured in bytes, that a network can transmit. The
default value is 1454 . Please set up the MTU according to your system
environment. Only enter a new MTU when your ISP requires, otherwise,
please leave it as the default setting. When using PPPoE connection, you
may need to change MTU settings to maintain the connection with your
ISP, however, if the incorrect value was entered, you may be unable to
access certain websites. Reducing the packet size can help connecting to
certain websites or speeding up the transmission rate.