Planex Mini100 Скачать руководство пользователя

Страница: 85 / 89

150

Mini100/Mini2

e. Please enter the name of the remote host that xxxx is attached to:

->Enter the IP address that has been assigned to the printer server in Section

7-1. If the host name and the IP address of the print server have been

already registered in /etc/hosts file, enter the host name instead of the IP

address.

f. Printer xxxx is connected to host xxx.xxx.xxx.xxx. Is this correct? (y/n)

->Enter “y”.

g. Other messages will be displayed after Step f. Enter “y” or “n” to each

question/ message. If you are not sure what the question means, enter

“n”.)

h. Would you like this to be the system default printer? (y/n) [n]

-> Enter “y” if you wish to set this printer to the default printer.

i. Do you want to install or remove printing (i/r/q)? [q]

->Enter “q”.

j. Do you want to start remote daemon now (y/n)

->Enter “y”.

3. The installation of the print server is now complete.

4. To print any data, use “lp” or “lpr” command. Enter the printer name that

has been assigned in Step 2-c in this section.

Command Format:

lp -d [printer name] [file name]

149

Mini100/Mini2

The print server supports each UNIX OS and Linux distribution. This

section will provide an installation procedure for SCO UNIX, SUN Solaris

and Linux. To enable the print server under other UNIX OSes, please refer

to the section on configuring a remote printer in the user’s manual of each

UNIX OS.

■

SCO UNIX (OpenServer 5.0.x)

1. Log on to the system with root permission.

2. Enter and run the following command.

mkdev rlp

The system will display a series of questions about the configuration of your

remote printer. Answer to each question in the following manner:

a. Do you want to install or remove printing (i/r/q)? [q]:

-> Enter “i”.

b. Do you wish to change the printer description file /etc/printcap (y/n)? [n]

-> Enter “y”.

c. Enter information for remote printers or local printers accepting remote

printing requests. Please enter the printer name (q to quit)

-> Enter a desired printer name that identifies the printer.

(Example: mini2)

d. Is xxxx a remote printer or a local printer (r/l)

-> Enter “r”.

Printing from a UNIX / Linux PC

Содержание Mini100


























































































Результаты поиска

Содержание Mini100

Отзывы:

Похожие инструкции для Mini100

Бренды по названию

Популярные бренды

Planex Mini100, Руководство пользователя

Результаты поиска

Содержание Mini100

Отзывы:

Похожие инструкции для Mini100

Бренды по названию

Популярные бренды