manualshive.com logo in svg

Planex FMX-24NZ, Руководство пользователя

Поделиться
Скачать
Planex FMX-24NZ Скачать руководство пользователя страница 14

- 14 - 

2-5. Administrator 
2-6. TFTP Update Firmware 
2-7. Configuration Backup 
2-8. Reset System 
2-9. Reboot

   

 
 
2.2. Port status   

 

This page provides current status of every port that depends on user’s setting and the negotiation 
result.  
 

 

 

1.

 

State: 

Display port statuses: 

disable or enable

. “Unlink” will be treated as “off”.   

2.

 

Link Status: 

Down means “No Link”, UP means “Link”.   

3.

 

Auto Negotiation: 

Display the auto negotiation mode: auto/force/Nway-force.   

4.

 

Speed status: 

Display 1000Mbps or 100Mbps or 10Mbps speed, port 1- 24 are 10/100Mbps, Port 

25-26 are 10/100/1000Mbps.   

5.

 

Duplex status: 

Display full-duplex or half-duplex mode.   

6.

 

Flow Control: 

Full: Display the flow control is enabled or disabled in full mode.   

Half: Display the backpressure is enabled or disabled in half mode.   

7.

 

Rate Control: 

Display the rate control setting.   

Ingr: Display the port effective ingress rate of user setting.   
Egr: Display the port effective egress rate of user setting.   

8.

 

Port Security: 

Display the port security is enabled or disabled.   

Содержание FMX-24NZ























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды