WEB MANAGEMENT INTERFACE
10
To configure the peer, repeat the above WDS steps except for the last step that the
MAC address information comes from the first WDS station.
Obtain WDS List Status
1)
Select the menu of Status.
2)
Select WDS List submenu.
3)
Check the signal strength of WDS link.
Check the
SNR
of WDS link after clicking
Status / WDS List
, there should be SNR
displayed; if the SNR is shown as N/A, the wiring and the above configuration
should be checked again.
Congratulations
Now, the system has been installed and configured successfully.
Note:
It is strongly recommended to make a copy of configuration backup.
