Planex BRL-04AX Скачать руководство пользователя страница 50

Страница: 50 / 50

- 50 -

Appendix C INTERNET PORT LINK STATUS

PPPoE link status

“PPPoE offline. Ready to

connect.”

Device’s Internet Port is not connected to the ISP’s dialup
server. Dialup server for connecting to the Internet is now
available.

"Connecting to server."

Device's Internet Port is now dialing to dialup server.

"Server found."

Device dialed to dialup server, and is negotiating with
dialup server.

"Start PPP negotiation."

Negotiation is ongoing.

"Authentication (PAP)."

Server is verifying the dialup account with PAP method.

"Authentication (CHAP)." Server is verifying the dialup account with CHAP method.

"Obtaining WAN IP

address."

Authentication is successful! Device now is obtaining IP
address from the dialup server.

"Connect successfully."

Device dials up to server successfully. User can connect to
internet now.

"Can not find server."

Device cannot dial up to the dialup server. Dial-up to
server failed.

"Fail on LCP stage."

Configuration for network link failed.

"Authentication (PAP)

failure."

Failed in authentication; failure was caused by wrong
password.

"Authentication (CHAP)

failure."

Verification on the identity of the device dialup account
failed.

"Fail to Obtain Internet IP

address."

Device cannot obtain IP address from the dialup server.
Dial-up to server failed.

"Server dropped the

connection."

Server cut the device's internet connection.
Device is disconnected to the Internet.

"Disconnect on idle."

Device has been idle longer than the idle interval and was
cut off from the connection. The idle interval value was set
in the field "Auto-disconnect if idle xxx Minutes".

"Connection establishes

timeout."

Device was re-trying to dialing-up to server and failed.
Device finally gave up dialing to the server.

DHCP link status

"DHCP already claimed" Device obtained IP address from DHCP server.

"DHCP under claiming"

Device is trying to obtain IP address from DHCP server.

Static IP assignment link status

“Static assigned”

IP address succeeds in manually setting up.

Содержание BRL-04AX



















































Результаты поиска

Содержание BRL-04AX

Отзывы:

Бренды по названию

Популярные бренды

Planex BRL-04AX, Руководство пользователя

Результаты поиска

Содержание BRL-04AX

Отзывы:

Бренды по названию

Популярные бренды