Planex BRL-04AX, Руководство пользователя

Страница: 44 / 50

- 44 -
Exchanger.
What is PPPoE (PPP Over Ethernet )?
PPPoE is known as a dial-up DSL service. It is designed to integrate the broadband services
into the current widely deployed, easy-to-use, and low-cost dial-up-access networking
infrastructure. Thus, customer can get greater access speed without changing the operation
concept.
How can I know I am using PPPoE?
PPPoE client software is provided by our ISP and should be installed onto your computer
first. You run the program to connect/disconnect to the Internet. User Account information
(User Name and Password) is also required each time you connect to the Internet access.
Note: After you have entered the PPPoE information during the device setup, and starting up
the device, the device will provide your Internet Service the PPPoE information and login
automatically. It is not necessary to install and run the PPPoE software on the computers and
you can just uninstall the PPPoE software from your computers.
IP address conflict
When you see the message box prompted for IP address conflict on any of the workstations
in the network, this means two or more workstations have the same IP address. If you have
setup the device as a DHCP server, on the problem workstation, please run the "winipcfg"
(see previous question) utility, select the correct Network Adapter, click “release all” to
release all current configuration first, then click “renew all” to renew the IP information
again (for Windows 2000/NT40/XP, run IPCONFIG /release and then run IPCONFIG
/renew). If the DHCP function is disabled and static IP addresses are assigned to each
workstation, please double check each workstation’s IP address for any duplicate IP.
Can not access the Internet
Check the physical connectivity of local network.
Check if both the LEDs of Local and Global on the product’s front panel are lit. If yes, go to
next step. Otherwise, make sure you are using the correct cables and the cables are
connected to the network devices properly.
Check the physical connectivity of broadband device.
Examine the LED of LAN port and the LED of the broadband signal input on the Cable
Modem/xDSL Modem. If the LAN LED is off, make sure you are using the correct cables
and the cables are connected to the devices properly. If the LED of the broadband signal is
off, please contact your ISP.
Note: You can also call your ISP and make sure the Internet service is still online.
Check the status of this product.
After checking the cabling, you also have to check if you have entered the correct user name
and password that your ISP provided. While checking, please note that the information is
case sensitive.
To check the Internet connection status, open the browser to start the Web configuration,
select Network Status
Æ
WAN IP Status. Check if Link Status displays “Connect
successfully”. If not, you may have to contact your ISP to see if their Internet service is
available.