PlaneWave CDK700, Руководство пользователя

Страница: 12 / 24

12
which is at the base of the fork arms as shown in the picture below.
Connecting the Computer to the Control Panel Box and to the on-board
Accessories
The Control Panel has an Ethernet connector so it can talk to the computer. Attach the Ethernet port at
the bottom of the Control Panel to the computer via the Ethernet cable provided.
The computer also needs to be connected to the telescope
via USB cable. This is because the telescope has two USB
ports built into the telescope. This way accessories like the
Focuser, Field De-rotator, CCD Camera’s and Autoguiders
can easily connect through the telescope without having a
bunch of extra cables hanging off the side of the telescope.
Inside the fork base, you can see the USB hubs in the
picture to the right. There is already a USB cable installed
in the telescope. You will need to route that table down
through the bottom of the telescope. Then you will to take the provided USB extension to connect
between the USB cable coming out of the bottom of the telescope to the computer.