Chain Hoist PREMIUM PRO-E
5
1 GENERALLY
1.1
Intellectual property
2 WARRANTY
This user and maintenance manual should give your important details for the
saftey and reliability of your chain. It is not a replacement for a service security
edict and the accident prevention regulations stipulated by the employer‘s liabil-
ity insurance coverage respectively the scores of standards which are different
in each country. Please follow the country specific standards and regulations.
The actual service security edict, the regulations of the employer‘s liability in-
surance coverage DGUV and the relevant legislation of the association for ma-
chines 2006/42/EG (machine directive) are valid in Germany.
Hoist models, drawings and engineering are of our exclusive property. It is
expressly forbidden to copy, use or hand over to third parties such information
without a specific written permission.
– Read instruction and make it available to operators on the device before use.
– Operator must be instructed properly with the device.
– Never leave the device under load unattended!
– Never exceed lifting capacity indicated on the name plate.
– Do not draw any pull and lifting chains over angles.
– Do not transport persons or loads with the product over areas where per-
sons could be.
– Drive the hoist only with battery powered devices with a maximum revolu-
tions of 2500 1/min.
– Device must be checked once a year by a technical expert, in case of
harder operating conditions more often. The enterpriser is liable in case of
damages and has to provide test certificates.
– Check the device regarding damages, unfastened screws or twisted chain
before using it and eliminate failures.
– Repair works on hoisting devices shall only be carried out by the manufac-
turer or an instructed repair shop by using original spare parts.
– Check load carrying constructions, load securing devices, mountings, cross
beams etc. regarding load carrying capacity and condition of the required
loads by a technical expert.
– Non-observance of the instruction, improper use, and corrosion by insuffi
-
cient protection or product alterations without authority result in expiry of the
warranty.
– Risk of corrosion in case of continuous contact with unfavourable atmos-
pheric conditions as for example high humidity or harmful environmental
influences atmospheres with acid vapours, corrosive gases or high dust
concentration cause early wear. This effectuates no claim under warranty.
– Further information or spare part lists will kindly be provided by us or your
specialist dealer
Содержание Premium Pro-E
