XRT-811 User
’
s Manual
82
Buttons
Save
Save the RIP setting. This has no effect on the Static Routing Table.
Add
Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Update
Update the current Static Routing Table entry, using the data shown
in the "Properties" area on screen.
Delete
Delete the current Static Routing Table entry.
Clear Form
Clear all data from the "Properties" area, ready for input of a new
entry for the Static Routing table.
Generate Report
Generate a read-only list of all entries in the Static Routing table.
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to XRT-811, so
that they can be forwarded to the external LAN, WAN, or Internet. To achieve this, the local
LAN must be configured to use XRT-811 as the
Default Route
or
Default Gateway
.
Local Router
The local router is the Router installed on the same LAN segment as XRT-811. This router
requires that the
Default Route
is XRT-811 itself. Typically, routers have a special entry for the
Default Route
. It should be configured as follows.
Destination IP Address
Normally 0.0.0.0, but check your router documentation.
Network Mask
Normally 0.0.0.0, but check your router documentation.
Gateway IP Address
The IP Address of XRT-811.
Metric
1
Other Routers on the Local LAN
Other routers on the local LAN must use XRT-811's
Local Router
as the
Default Route
. The
entries will be the same as XRT-811's local router, with the exception of the
Gateway IP
Address
.
•
For a router with a direct connection to XRT-811's local Router, the
Gateway IP Address
is the address of XRT-811's local router.
•
For routers which must forward packets to another router before reaching XRT-811's local
router, the
Gateway IP Address
is the address of the intermediate router.
