40
Parameters
Description
Filter client PCs by IP
Fill
“
IP Filtering Table
”
to filter PC clients by IP.
Add PC
You can click Add PC to add an access control rule for
users by IP addresses.
Remove PC
If you want to remove some PC from the "IP Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button.
Filter client PC by MAC address
Check
“
Enable MAC Filtering
”
to enable MAC Filtering.
Add PC
Fill in
“
Client PC MAC Address
”
and
“
Comment
”
of the
PC that is allowed to access the Internet, and then click
“
Add
”
. If you find any typo before adding it and want to
retype again, just click "Reset" and the fields will be
cleared.
Remove PC
If you want to remove some PC from the "MAC Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button. If you
want to clear the selection and re-select again, just click
“
Reset
”
.
You can now configure other advance sections or start using the router (with the advance settings
in place)
