35
Parameters
Description
Enable Virtual Server
Enable Virtual Server.
Private IP
This is the LAN client/host IP address that the Public Port
number packet will be sent to.
Note:
You need to give your LAN PC clients a fixed/static IP
address for Virtual Server to work properly.
Private Port
This is the port number (of the above Private IP host) that the
below Public Port number will be changed to when the packet
enters your LAN (to the LAN Server/Client IP)
Type
Select the port number protocol type (TCP, UDP or both). If you
are unsure, then leave it to the default both protocol.
Public Port
Enter the service (service/Internet application) port number from
the Internet that will be re-directed to the above Private IP
address host in your LAN
Note
: Virtual Server function will have priority over the DMZ
function if there is a conflict between the Virtual Server and the
DMZ settings.
Comment
The description of this setting.
Add Virtual Server
Fill in the "Private IP", "Private Port", "Type",
“
Public Port
”
and
"Comment" of the setting to be added and then click "Add". Then
this Virtual Server setting will be added into the "Current Virtual
Server Table" below. If you find any typo before adding it and
want to retype again, just click "Clear" and the fields will be
cleared.
