show security mac-learning
Show port security status
show security static-MAC
Show static mac table information
show snmp
Show snmp information
show snmp rmon
Show snmp rmon state
show spantree
Show spanning tree information
show syntax
Show basic help infomation
show system
Show system information
show trunk
Show trunk information
show version
Get last software version
show vlan
Show vlan information
show vlan type
Show current vlan type
3.5.2 Privileged Command
To access to the second level, enter the
“enable”
command in the first level. The sysem then prompt for
a password. Please enter
“password”
for the password.
The promt then changes to
“Switch\enable>”
. Entering a question mark
"?"
at the prompt displays the
list of commands available for command mode.
3.5.2.1 Clear command
Clear command is to clear the parameter. The follow table lists the clear commands and the equivalent
usages.
Command
Description
clear channel
Clear member from channel
clear mirror monitored-port egress
Clear egress monitored port for mirror
clear mirror monitored-port ingress
Clear ingress monitored port for mirror
clear multicast router
Clear router port
clear port counters
Clear port statistics counter
clear port rate-shaping
Clear rate-shaping of all ports
clear port spantree portcost
Restore spanning tree port cost to default value
clear port spantree portpri
Restore spanning tree port priority to default value
clear port storm-limit
Clear strom limit of all ports
clear qos map cos-queue-map
Reset cos-queue map to default
clear qos map dot1p-cos-map
Reset dot1p_cos map to default
clear qos map mac-cos-map
Clear qos map mac-cos-map
clear qos map vlan-cos-map
Clear qos map vlan-cos-map
clear security filter-MAC
Clear MAC filter entry
