5.4 Wireless
This screen allows you to Enable/Disable WNRT-625G wireless function.
Be noted:
Before switch the Radio from this page (Software option), please double check “Radio on/off” hardware
button on back of the device has configured. The first priority is hardware button.
(When switch hardware button, it will disconnect and reconnect to turn on/off wireless signal. When
switch Hardware button to Radio on, the software option can’t apply to “Disable” option; When switch
Hardware button to Radio off, the software option can’t apply to “Enable” option.)
Parameters
Description
Enable/Disable
You can select to “
Enable
” or “
Disable
” the Wireless interface. After
selected, please click “Apply” to make the settings effect.
After configuration complete, please click “Apply”
button to save the configuration. Then you will see a
screen to prompt you the settings are saving successfully. You may press “Continue” for configure other
settings or “Apply” to restart WNRT-625G with new configuration. Please refer to section 4.2.7 for more
information about this screen.
39