- 15 -
Network Address:
Type the static IP address your network uses to access the Internet.
Your ISP or network administrator provides you with this information.
Network Mask:
Type the network (subnet) mask for your network. If you do not type a
value here, the network mask defaults to 255.255.255.255. Your ISP or network
administrator provides you with this information.
Gateway Address:
Type the gateway address of your network. Your ISP or network
administrator provides you with this information.
Interface:
Select the interface WAN or LAN that you will use to connect to the Internet.
Metric:
Select which metric you want to apply to this configuration.
Add:
Click to add a configuration to the static IP address table at the bottom of this page.
Update:
Select one of the entries in the static IP address table at the bottom of the page
and, after changing parameters, click “Update” to confirm the changes.
Delete:
Select one of the entries in the static IP address table at the bottom of the page and
click “Delete” to remove the entry.
New:
Click “New” to clear the fieldes and add required information to create a new entry.
3.4.2 Dynamic
This screen allows you to set the NAT parameters.
