PLANET WNL-9310 User Manual
increase it again, but it will likely decrease overall network
performance. Select a setting within a range of 256 to 2346 bytes.
Minor change is recommended.
The default value is 2346. In some case, you may be able to
improve performance by adjusting this value.
RTS/CTS Threshold
RTS / CTS(Request To Send / Clear To Send) is the mechanism
used by the 802.11 wireless networking protocol to reduce frame
collisions introduced by the hidden terminal problem and exposed
node problem.
RTS / CTS packet size threshold is 0 ~ 2346. Typically, sending
RTS frames is turned off by default (threshold
≧
2346). If the
packet size the node wants to transmit is larger than the threshold,
the RTS / CTS handshake gets triggered. If the packet size is
equal to or less than threshold the data frame gets sent
immediately
The default value is 2346. In some case, you may be able to
improve performance by adjusting this value.
802.11n
Enable 802.11n Network
Enable this if you want to use the 802.11n network.
Channel Width
Select the desired channel width.
Guard Interval
Use this to manually set the interval, if desired. The default is
“Auto”.
Extension Channel
Select the desired channel.
Antenna Selection
Select the desired option. The default is set to “Auto”.
23
