User Manual of WNAP-C3220E
-10-
Chapter 3. Connecting to the AP
System Requirements
3.1
Broadband Internet Access Service (Cable/xDSL/Ethernet connection)
One IEEE 802.3at PoE switch (supply power to the WNAP-C3220E)
PCs with a working Ethernet adapter and an Ethernet cable with RJ45 connectors
PCs running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or later, Linux,
UNIX or other platforms compatible with
TCP/IP
protocols
1. The AP in the following instructions refers to PLANET WNAP-C3220E.
2. It is recommended to use Internet Explorer 11, Firefox or Chrome to access the AP.
Installing the AP
3.2
Before installing the AP, make sure your PoE switch is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP.
Please install the AP according to the following steps. Don't forget to pull out the power plug and keep your
hands dry.
Step 1.
Place the bracket on the wall or ceiling and mark each point in the bracket for the screws. Remove the
bracket to drill the points and insert the plastic wall-mounts. Use screws to lock the bracket by a screw
driver.
Figure 3-1
Fix it with the screws
