22
Chapter 6 Frequently Ask Question
ü
Why WAP-3000 and WL-3553 cannot work properly?
If you want the WAP-3000 to works with WL-3553, please fixed the data rate of WAP-3000 to
11Mbps. Because the WAP-3000 chipset and WL-3553 are not fully compatible, you need to
make this setting for them to connect each other.
ü
How to create a new Ad-Hoc network with WL-3553?
If you want to create a new Ad-Hoc network with WL-3553, please add a new profile and
checked the setting
“
This is a computer-to-computer (ad hoc) network; wireless access points
are not used
”
of this profile. Then set this profile to default. When this setting is checked,
WL-3553 will work in Ad-Hoc mode. If unchecked, WL-3553 will work in Infrastructure mode.
ü
Does AP mode WL-3553 work like a stand along Access Point?
Yes, AP mode WL-3553 is work likes a stand along Access Point when you use it to your
wireless network for the wireless clients to connected. When you run site survey function of your
wireless clients, you can find the AP mode WL-3553 and connected.
