20
5.2 Advanced
In this option, you can have some advanced settings for WL-3553 working.
u
Beacon
Interval:
The interval of time that this access point broadcast a beacon. Beacon is
used to synchronize the wireless network.
u
DTIM
Period:
Shows the client how often the beacon contains a delivery traffic indication
message. Input range is from 1 to 65535. By default, it is set to 3.
u
Preamble
Mode:
Preamble type defines the length of CRC block in the frames during the
wireless communication.
“
Short Preamble
”
is suitable for high traffic wireless network.
“
Long
Preamble
”
can provide more reliable communication.
u
Data
Rate:
Select the Data Rate. There are 1 Mbps, 2Mbps, 5.5 Mbps, 11 Mbps, and Auto
mode. If Auto Mode is been selected, the device will select the best transfer rate
automatically.
u
Security:
Ø
Open Authentication:
With this setting, the station in the WLAN can receives and
transmits data from Access Point (null authentication).
Ø
Shared Authentication:
With this setting, allows communication only with other
devices with identical WEP settings.
Ø
Both:
With this setting, stations can communicate with the Access Point either with or
without data encryption. It will detect the AP that it connected is using which
Authentication mode and use the same mode to communicate.
u
Set
Defaults:
The settings of this page will reset to default by click this button.
u
Apply:
After configure, please click this button to save the settings.
