![background image](http://html1.mh-extra.com/html/planet/wirefree-wl-2400/wirefree-wl-2400_manual_1562118009.webp)
9
play ISA adapter. The IRQ and I/O Port of the adapter will be
configured automatically by the
Plug-and-Play BIOS
or
Windows 95
.
If you install the WL-2400 wireless LAN adapter into a computer neither
with
Microsoft Windows 95
nor the
Plug-and-Play BIOS
, you should
load plug-and-play configuration manager (such as
Intel Plug and Play
Configuration Manager, CM
) to configure the WL-2400 wireless LAN
adapter automatically. Otherwise, you should use the
WLJMP.EXE
program (also included in the WireFree WL-2400 Driver & Utility
diskette) to setup the adapter manually before the network driver or utility
is running.
WLJMP
is an MS-DOS command. You can simply issue the command
in the DOS prompt:
WLJMP -irq <IRQ Number> -port <IO Port Address>
The
<IRQ Number>
can be 10, 11, or 12. The
<IO Port Address>
is
from 0x280 to 0xFFC0 stepped by 0x40, such as 0x280, 0x2C0, 0x300,
0x340, 0x380, 0x3C0, …, 0xFFC0.
You should provide the
IRQ Number
and
I/O Port Address
manually
depend on the configuration of your computer. Wrong (conflicting) setting
may cause the system hung-up.
NOTE
: If you had setup wrong IRQ or I/O-port parameters when issued WLJMP
command, or you want to change the parameter, you
must
power off your
computer and reboot your computer then issue WLJMP command again.
Otherwise, the IRQ and I/O-port parameters cannot be modified simply by
running WLJMP again.
Содержание WireFree WL-2400
Страница 1: ...WireFree WL 2400 Wireless LAN ISA Adapter ...
Страница 20: ...20 WISA COM Fig3 2 Configure STARTNET BAT Fig3 3 Login NetWare Server ...
Страница 24: ...24 Fig4 3 Step3 of Wireless LAN Utility setup Fig4 4 Step4 of Wireless LAN Utility setup ...
Страница 26: ...26 1 Click Start point to Programs and run WLA Utility 2 Main menu appears WISA Wireless LAN PnP Adapter ...