Planet WireFree WL-2400, Руководство пользователя

Страница: 32 / 39

32
Fig4.11 Loopback through Access Point
¨
Packet Sent:
Total test packets have been sent.
¨
Packet Received:
Total responding packets have been received.
¨
Elapsed Time:
Total testing time.
¨
Signal level:
The signal level when receiving last responding packet. The signal level is
calculated as the percentage of its signal level measurement relative to the full signal level.
The “Access Point Loopback Test” window will be displayed after pressing the [ Start ] button.
This window contains same status / statistical information in the “Master Test Station” window.
It works only in “Infrastructure Mode”.
l
Access Point Browser
Select the [Access Point Browser] in and you will see a screen shown as below. Choose [Go], all
the active Access Points will be shown.