Planet WGS-4215-8T2S Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 359

Planet WGS-4215-8T2S Скачать руководство пользователя страница 99

User’s Manual of WGS Managed Series

99

•

Multicast Packets

The total number of good frames received that were directed to this multicast
address.

•

CRC / Alignment

Errors

The number of CRC/alignment errors (FCS or alignment errors).

•

Undersize Packets

The total number of frames received that were less than 64 octets long(excluding
framing bits, but including FCS octets) and were otherwise well formed.

•

Oversize Packets

The total number of frames received that were longer than 1518 octets(excluding
framing bits, but including FCS octets) and were otherwise well formed.

•

Fragments

The total number of frames received that were less than 64 octets in length
(excluding framing bits, but including FCS octets) and had either an FCS or
alignment error.

•

Jabbers

The total number of frames received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either an FCS or
alignment error.

•

Collisions

The best estimate of the total number of collisions on this Ethernet segment.

•

64 Bytes Frames

The total number of frames (including bad packets) received and transmitted that
were 64 octets in length (excluding framing bits but including FCS octets).

•

65-127 Byte Frames

128-255 Byte Frames

256-511 Byte Frames

512-1023 Byte Frames

1024-1518 Byte

Frames

The total number of frames (including bad packets) received and transmitted
where the number of octets falls within the specified range (excluding framing
bits but including FCS octets).

«
...
97
98
99
100
101
...
»

Содержание WGS-4215-8T2S








































































































































































































































































































































































Отзывы:

Нет отзывов