Web Configuration
WAP-6200 provides a user friendly interface for users to configure via web browser.
Please follow the below steps to configure WAP-6200 basic settings.
1. It will take about 55 seconds to complete the boot up sequence after power on
from PoE.
2. Open your web browser and type WAP-6200 default IP address
(http://192.168.1.25
4
) into the “Address Field” of you web browser. Before
configuration, please make sure your PC’s IP address is under the same IP range
with WAP-6200, such as 192.168.1.x.
3. After enter the IP address and press Enter key, you can see the login web page
without any username/password.
Further Configuration
For more settings of WAP-6200, please refer to the user’s manual in the CD. If you
have any difficulty on resolving the problem while installing or using the device,
please feel free to contact your local dealer or PLANET Technical Support.
