Planet VIP-321 Скачать руководство пользователя страница 31

Страница: 31 / 63

DTMF Setting

This page defines the RFC2833 Out-Band DTMF, Inband DTMF and Send DTMF SIP Info in this page.

To change this setting, please following your ISP information. When you finished the setting, please

click the Submit button.

RPort Settings

This page defines the RPort Enable/Disable in this page. To change this setting, please following your

ISP information. When you finished the setting, please click the Submit button.

Other Settings

This page defines the Hold by RFC, Voice/SIP QoS and SIP expire time in this page. To change these

settings please following your ISP information. When you finished the setting, please click the Submit

button. The QoS setting is to set the voice packets’ priority. If you set the value higher than 0, then the

voice packets will get the higher priority to the Internet. But the QoS function still need to cooperate with

the others Internet devices.

A Domain Name Server (DNS) SRV record helps connecting to a SIP user in a similar way that an MX

record helps email delivery. When you send email to "[email protected]", the MX record for

example.com might tell the mail transfer agent to deliver email to a completely different machine, such

as "zaphod.foobar.com". Similarly, when you want to make a SIP phone call to [email protected],

the SRV record might tell your computer that it should connect to "galaxy.starsystem.tw" to do so.

Dialing by domain names lets a SIP user have a single public "SIP address" which can be redirected at

will to their current location. SRV records maintain stability and also opens up the possibility to use your

own domain, regardless of the domain of the SIP service you are using.

Содержание VIP-321
































































Результаты поиска

Содержание VIP-321

Отзывы:

Похожие инструкции для VIP-321

Бренды по названию

Популярные бренды

Planet VIP-321, Руководство пользователя

Результаты поиска

Содержание VIP-321

Отзывы:

Похожие инструкции для VIP-321

Бренды по названию

Популярные бренды