Case 3: SIP Proxy mode
In this example, there are two Routers register to UMG-2000 via wireless connection. The telephone
set could dial the extension number to each other.
STEP 1:
Log in UMG-2000 and create four testing accounts:
5001 ~ 5004
(password same as number) for
Router-A and Router-B. To enable the Wireless AP Service on UMG-2000 for wireless connection
between Router-A and Router-B.
STEP 2:
Please log in Router-A via web browser, access to “Wireless Basic Settings” page to switch to
Client
mode, and fill in the SSID of UMG-2000 (UMG_WIFI). In the setting page, please insert the
account/password information obtained from your service provider (in this sample, we’re using
PLANET UMG-2000 as the IP PBX server for SIP account, call authentications), and then the sample
configuration screen is shown below:
-
66
-
