6.3.2 DI Settings
This function allows users to manage camera’s digital input port right from
the recorder. You can setup the recorder to receive triggers from a particular
camera’s input port.
1. For cameras that come with physical digital input port, their port will be
listed in the far left drop-down menu.
2. Pick the desired channel for DI mapping, and then select the camera’s
input port from the drop-down menu.
3. Select the trigger condition from the “Condition” drop-down menu.
4. Finally, define the trigger duration.
The recorder does not control camera’s input port in a way to let you pair
recorder itself with a camera’s input port for event receiving.
der only acts as a medium for pairing up input ports betw
cameras and the recorder.
The recor
een
Only c
t.
Some
urce be configured at a time, e.g.: if
the ca
be di
camer
urce, you will not be able to
select
ce for this camera under “Event
“Event Trigger” setup page.
onnected cameras will be displayed in the lis
cameras only allow one trigger so
mera has the motion detection function turned on, its digital input will
sabled and vice versa. Under such circumstance, if you set to use
er so
a’s digital input port as the event trigg
motion detection as the trigger sour
Configurations” >>