- 19 -
When you select
SNMP Access Control
, the system will display four blank fields for setting
(maximum of 4 SNMP devices can be set). Right-click on a blank in the list and click
Edit Address.
The
New/Edit Address
dialog box will appear. Type in the IP address and set the password for the
SNMP device. There are two levels of access rights can be assigned:
•
Read:
The user can read all information except the
Access Control
settings, but is not allowed to
alter anything.
•
Read/Write
: The user can read and change all settings.
Please note do not set all SNMP devices in the table to Read only; otherwise the WAP-5000 is
impossible to be modified. The only solution is to reset the device back to factory defaults by using
Kick Start
.
MAC Access Control
You can restrict the wireless connection of WAP-5000 by using
MAC Access Control
. There are up
to 1000 stations can be granted or denied access. There are three
Access Options
can be
selected:
•
Disabled
: Disable the MAC Access Control. This is the default setting.
•
Accepted List:
Wireless stations with MAC addresses on the list are allowed to access
WAP-5000.
•
Denied List:
Wireless stations with MAC addresses on the list are prohibited to access WAP-5000.
