Planet NAS-3410 Скачать руководство пользователя страница 4

Страница: 4 / 108

Table of Contents

Chapter 1 Introduction ----------------------------------------------------------------- 1

1.1 Features --------------------------------------------------------------------------------------------------------1

1.2 Package Contents --------------------------------------------------------------------------------------------1

1.3 Physical Details -----------------------------------------------------------------------------------------------2

Chapter 2 Initial Installation ----------------------------------------------------------- 4

2.1 Hardware Installation Procedures ------------------------------------------------------------------------4

2.2 Setting the IP Addresses------------------------------------------------------------------------------------6

2.3 Accessing the Administration Home Page--------------------------------------------------------------8

Chapter 3 Server Configuration---------------------------------------------------- 10

3.1 Server Information and Settings ------------------------------------------------------------------------ 10

3.2 Modifying the Administrator’s Password -------------------------------------------------------------- 11

3.3 Enabling UPS Support ------------------------------------------------------------------------------------ 11

3.4 Server Maintenance---------------------------------------------------------------------------------------- 12

3.5 Shutting Down the Server -------------------------------------------------------------------------------- 13

3.6 Upgrading the Firmware ---------------------------------------------------------------------------------- 13

3.7 License for Optional Features --------------------------------------------------------------------------- 13

Chapter 4 Network Configuration ------------------------------------------------- 15

4.1 Network Information---------------------------------------------------------------------------------------- 15

4.2 TCP/IP Settings --------------------------------------------------------------------------------------------- 16

4.3 Windows Settings------------------------------------------------------------------------------------------- 17

4.4 UNIX/Linux Settings---------------------------------------------------------------------------------------- 18

4.5 Macintosh Settings ----------------------------------------------------------------------------------------- 20

4.6 NetWare Network Settings ------------------------------------------------------------------------------- 20

4.7 Web Data Access Settings ------------------------------------------------------------------------------- 21

4.8 FTP Data Access Settings-------------------------------------------------------------------------------- 21

4.9 SNMP Settings ---------------------------------------------------------------------------------------------- 22

4.10 Email Settings---------------------------------------------------------------------------------------------- 23

4.11 SSL Settings------------------------------------------------------------------------------------------------ 23

Chapter 5 Storage Management -------------------------------------------------- 25

5.1 Volume Usage and Status -------------------------------------------------------------------------------- 25

5.2 Creating a Volume------------------------------------------------------------------------------------------ 27

5.3 Deleting a Volume ------------------------------------------------------------------------------------------ 28

Содержание NAS-3410













































































































Результаты поиска

Содержание NAS-3410

Отзывы:

Planet NAS-3410, Руководство пользователя, Страница: 4 / 108

Результаты поиска

Содержание NAS-3410

Отзывы: