Planet IVC-234GT Скачать руководство пользователя страница 3

is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may 
cause radio interference, in which case the user may be required to 
take adequate measures.

Energy Saving Note of the Device

This power required device does not support Standby mode operation. 
For energy saving, please remove the power cable to disconnect the 
device from the power circuit. Without removing power cable, the 
device will still consume power from the power source. In view of 
Saving the Energy and reducing the unnecessary power consumption, it 
is strongly suggested to remove the power connection for the device if 
this device is not intended to be active.

WEEE Warning

To avoid the potential effects on the environment and human 
health as a result of the presence of hazardous substances 
in electrical and electronic equipment, end users of electrical 
and electronic equipment should understand the meaning of 

the crossed-out wheeled bin symbol. Do not dispose of WEEE as 
unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender 
User’s Manual

For Models:

 IVC-234GT

Revision:

 1.0 (May 2018)

Part No.:

 2350-AC0530-000

Содержание IVC-234GT





























Отзывы: