Planet ISG-101 Скачать руководство пользователя страница 24

PLANET

 

ISG-101

 

 

Internet Subscriber Gateway 

 

Subscriber Fixed NAT IP was Conflict with 

ISG-101 WAN Port NAT IP. 

To avoid this IP conflict cases please configure 

the more infrequently used network for DHCP 

pool such like “192.168.223.X”, ”172.29.X.X”, 

“10.59.X.X”. And we suggest using the Public IP 

for ISG-101 WAN Port. 

Figure 4-40 IP Conflict Case A 

 

Subscriber Fixed NAT IP was Conflict with 

ISG-101 LAN Port NAT IP. 

To avoid this IP conflict case please configure 

the more infrequently used network for LAN IP’s 

pool such like “192.168.223.X”,”172.29.X.X” and 

“10.59.X.X”.

 

Figure 4-41 IP Conflict Case B 

 

Subscriber Fixed NAT IP was Conflict with one 

PC which outside the ISG-101 WAN port but in 

the LAN. 

To avoid this IP conflict cases please configure 

the more infrequently used network for the 

Network between Router & ISG-101 such like 

“192.168.223.X”, ”172.29.X.X”, “and 

10.59.X.X”.

 

Figure 4-42 IP Conflict Case C

 

 

One subscriber Fixed IP was Conflict with the 

other (DHCP Client or fixed IP). The ISG-101 

WAN Port is same Network with these two 

subscribers’ PC. 

To avoid this IP conflict cases please configure 

the more infrequently used network for the 

Network between Router & ISG-101 such like 

“192.168.223.X”, ”172.29.X.X” “10.59.X.X”. 

The other case is even ISG-101 is different 

network with two conflict IP PCs. These two PC 

will show conflict IP message but these two PCs 

can surf the Internet normally. 

To avoid this case please using V-LAN Switch. 

Figure 4-43 IP Conflict Case D 

Notice

1. 

Some subscribers might have the proxy server configuration in the web browser, for this case 

the subscribers must cancel the proxy server settings. However, PLANET will support the 

new firmware in the future to leave out this effort. For late released information, please check 

the PLANET Web Site.

 

2. 

Some subscribers can access the Internet regularly but might not be able to send and receive 

the E-mail normally. This is according to the subscriber’s settings and the subscriber’s E-mail 

service provider. Some ISP doesn’t support the Internet mail, users are limited to send and 

receive E-mail from the specified network. Furthermore, some subscribers are unable to 

send/receive E-mail because their E-mail server address is private IP (IP masquerade). For 

E-mail redirection

 function please check the page 22 

“7) Email server IP address” 

48 

49 

Содержание ISG-101






























Отзывы: