Planet ISG-101 Скачать руководство пользователя страница 16

PLANET

 

ISG-101

 

 

Internet Subscriber Gateway 

 

Notice:

 The RADIUS Server follows the RFC 2138 and RFC 2139 stand. And the authentication 

port number is 1645 and 1812. The administrator can configure the port number according to his 

own RADIUS server. 

For more detail information of RADIUS please check the manual of your RADIUS server. 

4-2-7 Customize Login UI 

 

Figure 4-17 Web-based Configuator Customer Login UI Screen

 

Selection:

 The ISG-101 provides two different login page formats. One is “Standard”, this is 

ISG-101 default login page, can’t be changed. The other is ”Advanced”, that is to say, 

administrator can design the subscriber login page by himself. 

Welcome Image:

 You can choose “

None

” or “

Default Image

”.. 

Welcome Slogan:

 The maximum allowed length is 80 characters. 

Page Background:

 The page background can be none or specified color. For the background 

color format please views the color grid. The allowed format is Hexadecimal (RGB values of 

Red, Green, and Blue, where each component has a hexadecimal value of from 00 to FF. 

000000 is black and FFFFFF is white.) 

Article: The article is allowed the administrator to input a paragraph in the subscriber login page 

for advisement or announcement. The maximum character of the article is 1024. 

Article Text Color:

 The article text color can be specified color. For the specified text color format 

please views the color grid. The allowed format is Hexadecimal 

Article Background Color:

 The article background can be specified color. For the background 

color format please views the color grid. The allowed format is Hexadecimal (RGB values of 

Red, Green, and Blue, where each component has a hexadecimal value of from 00 to FF. 

000000 is black and FFFFFF is white.) 

Information:

 Allow the administrator to input the text information such like address, telephone 

number and fax information. The maximum character of the information is 80. 

Comments:

 Allow the administrator to input the text comments such like “Pleas Contact to our 

Customer Service Center, EXT 142”. The maximum character of the information is 80. 

 

Figure 4-18 Standard Subscriber Login Page Screen 

32 

33 

Содержание ISG-101






























Отзывы: