Planet ISG-101 Скачать руководство пользователя страница 1

 

 

Copyright 

Copyright (C) 2002 PLANET Technology Corp. All rights reserved.   

The products and programs described in this User’s Manual are licensed products of PLANET 

Technology, This User’s Manual contains proprietary information protected by copyright, and this 

User’s Manual and all accompanying hardware, software, and documentation are copyrighted.   

No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to 

any electronic medium or machine-readable form by any means by electronic or mechanical. 

Including photocopying, recording, or information storage and retrieval systems, for any purpose 

other than the purchaser's personal use, and without the prior express written permission of 

PLANET Technology. 

 

Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments 

and applications, and makes no warranty and representation, either implied or expressed, with 

respect to the quality, performance, merchantability, or fitness for a particular purpose. 

PLANET has made every effort to ensure that this User’s Manual is accurate; PLANET disclaims 

liability for any inaccuracies or omissions that may have occurred. 

Information in this User’s Manual is subject to change without notice and does not represent a 

commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies 

that may be contained in this User’s Manual. PLANET makes no commitment to update or keep 

current the information in this User’s Manual, and reserves the right to make improvements to 

this User’s Manual and/or to the products described in this User’s Manual, at any time without 

notice. 

If you find information in this manual that is incorrect, misleading, or incomplete, we would 

appreciate your comments and suggestions. 

 

CE mark Warning 

The is a class B device, In a domestic environment, this product may cause radio interference, in 

which case the user may be required to take adequate measures. 

Trademarks 

The PLANET logo is a trademark of PLANET Technology. This documentation may refer to 

numerous hardware and software products by their trade names. In most, if not all cases, these 

designations are claimed as trademarks or registered trademarks by their respective companies. 

 

Revision 

User’s Manual for PLANET Internet Subscriber Gateway: 

Model: ISG-101 

Rev: 1.0 (Jan. 2002) 

Part No. EM-ISG101V1   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание ISG-101






























Отзывы: